Accura 02212R-12" Production Model Cabinetmakers Table Saw
Dimensions :
81 1/2 " wide x 38 1/2 deep x 39 1/2" high
Base footprint 26"x23 1/2
Shipping Crate 3/4' x 43' x 30
Rip fence packed in separate box, 22 pounds 16' x 44' x 6'
Fence rails packed in separate box 3" x 3" x 79"
High quality. high durability saws manufactured by a factory we have represented for over 35 years.
Specifications:
Max dado width 13/ 16"
Interchangeable arbor system
1" arbor is highly rigid, offering glue line rips
Miter slot is 3/8" x 3/4"
Heavy duty miter gauge included
50" fence and rail system capacity rip to right of blade
Right tilt
Requires a 30 AMP fused circuit
Included magnetic starter has thermal overload protection
Capacitor start and run: 27 AMPS
4140 RPM Arbor speed
13,000 ft/min rim speed with 12" blade
Max cut depth at 45 degrees is 2 5/8"
Table height from floor is 34 1/2"
Distance from the front of the table to the center of the blade is 18 1/8" FEATURES: Heavy duty polished and precision ground table top is 2" thick on the main casting and measures 30 1/4" deep x 48" wide with the extensions and has beveled edges for ease of feeding.
Heavy duty stamped and welded steel cabinet for rock solid rigidity.
Large cast iron hand wheels and locks for ease of adjustment.
Fence lifts straight off of the table easily when not in use.
Triple belt drive with cast iron pulleys and sealed and permanently lubricated bearings for long life
Heavy cast iron trunnions, with the driven pulley yoked between bearings on both sides of the pulley,. Inboard and outboard for low vibration and high rigidity.
Even the table blade inserts are cast iron, approximately 3/4" thick, with both standard and dado inserts included.
5/8" arbor is convenient, letting you use existing blades with 5/8" arbors.
Hinged motor cover is standard and cabinet base is sloped to the 4 inch dust port to aid in dust collection.
the camlock fence locks squarely only on the front rail giving you accuracy so that when you read your measurements in the cursor, you don't have to double-check them front and back on the fence.
The 5 HP 220 V Single phase motor is a heavy duty TEFC, copper wound beast with a cast iron frame for big jobs.
Sliding table assembly:
The 48" x 96 capacity sliding table assembly is available and bolts right onto the cabinet with existing hardware included.
49" crosscut capacity allows you to cut the 4x8 sheets in half
Deluxe aluminum extrusions miter bar, slides in and out closer to the blade and has precision flip down stops for repetitive cutting.
The heavy duty quick clamp and roller bearings along with the flip stops make precision cutting of the parts like cabinet doors a breeze.
We have had many people mount our sliding table to almost any table saw by making brackets to fit.
You can get the sliding table with the saw at the time of purchase or you can add it later at any time.
81 1/2 " wide x 38 1/2 deep x 39 1/2" high
Base footprint 26"x23 1/2
Shipping Crate 3/4' x 43' x 30
Rip fence packed in separate box, 22 pounds 16' x 44' x 6'
Fence rails packed in separate box 3" x 3" x 79"
High quality. high durability saws manufactured by a factory we have represented for over 35 years.
Specifications:
Max dado width 13/ 16"
Interchangeable arbor system
1" arbor is highly rigid, offering glue line rips
Miter slot is 3/8" x 3/4"
Heavy duty miter gauge included
50" fence and rail system capacity rip to right of blade
Right tilt
Requires a 30 AMP fused circuit
Included magnetic starter has thermal overload protection
Capacitor start and run: 27 AMPS
4140 RPM Arbor speed
13,000 ft/min rim speed with 12" blade
Max cut depth at 45 degrees is 2 5/8"
Table height from floor is 34 1/2"
Distance from the front of the table to the center of the blade is 18 1/8" FEATURES: Heavy duty polished and precision ground table top is 2" thick on the main casting and measures 30 1/4" deep x 48" wide with the extensions and has beveled edges for ease of feeding.
Heavy duty stamped and welded steel cabinet for rock solid rigidity.
Large cast iron hand wheels and locks for ease of adjustment.
Fence lifts straight off of the table easily when not in use.
Triple belt drive with cast iron pulleys and sealed and permanently lubricated bearings for long life
Heavy cast iron trunnions, with the driven pulley yoked between bearings on both sides of the pulley,. Inboard and outboard for low vibration and high rigidity.
Even the table blade inserts are cast iron, approximately 3/4" thick, with both standard and dado inserts included.
5/8" arbor is convenient, letting you use existing blades with 5/8" arbors.
Hinged motor cover is standard and cabinet base is sloped to the 4 inch dust port to aid in dust collection.
the camlock fence locks squarely only on the front rail giving you accuracy so that when you read your measurements in the cursor, you don't have to double-check them front and back on the fence.
The 5 HP 220 V Single phase motor is a heavy duty TEFC, copper wound beast with a cast iron frame for big jobs.
Sliding table assembly:
The 48" x 96 capacity sliding table assembly is available and bolts right onto the cabinet with existing hardware included.
49" crosscut capacity allows you to cut the 4x8 sheets in half
Deluxe aluminum extrusions miter bar, slides in and out closer to the blade and has precision flip down stops for repetitive cutting.
The heavy duty quick clamp and roller bearings along with the flip stops make precision cutting of the parts like cabinet doors a breeze.
We have had many people mount our sliding table to almost any table saw by making brackets to fit.
You can get the sliding table with the saw at the time of purchase or you can add it later at any time.
