GRIZZLY G0834 12 inch jointer
With 84" of precision-ground cast-iron tables and a solid cast-iron stand, the G0834 12" Parallelogram Jointer weighs in at over half a ton! All that mass minimizes vibration and optimizes accuracy.
A burly 5 HP, 230V, single-phase motor powers the 8-row spiral cutterhead with 96 indexable carbide inserts. Carbide inserts hold their edge much longer than the high-speed steel of the straight knives and they are easily replaced or rotated should they become nicked.
Spiral cutterheads provide a smoother finish, reduce tearout, operate quieter, have longer knife life, and require less horsepower, making them a superior choice for serious woodworkers.
The G0834 features precise parallelogram table adjustment with easy-to-reach handwheels. With the parallelogram table setup, you get more opportunity for fine adjustment of the infeed table and the outfeed table for perfect alignment.
The center-mounted, 47" L x 5-3/8" H fence assists with accurate edge-jointing. It has stops at 45°, 90°, and 135° and comes with rack-and-pinion lateral adjustment.
The H9893 replacement inserts are available when the stock inserts get dull.
The G0834 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information.
Made in an ISO 9001 factory
SPECIFICATIONS: Motor: 5 HP, 230V, single-phase, 19A Maximum width of cut: 12" Maximum depth of cut: 1/8" Maximum rabbeting depth: 1/2" Cutterhead diameter: 3-7/8" Cutterhead type: 8-row spiral with 96 inserts Insert size, type: 15 x 15 x 2.5mm, indexable carbide Cutterhead speed: 4950 RPM Table size: 12-3/4" x 84" Fence size: 47" L x 5-3/8" H Minimum stock length: 14" Minimum stock thickness: 1/2" Dust port size: 5" Footprint: 19-1/2" x 41" Overall dimensions: 84" W x 39" D x 47" H Approximate shipping weight: 1278 lbs. FEATURES: Parallelogram tables with handwheel adjustment Precision-ground cast-iron tables Rabbeting table Pedestal-mounted switch for easy access Magnetic switch with thermal overload protection Solid cabinet stand V-belt drive
A burly 5 HP, 230V, single-phase motor powers the 8-row spiral cutterhead with 96 indexable carbide inserts. Carbide inserts hold their edge much longer than the high-speed steel of the straight knives and they are easily replaced or rotated should they become nicked.
Spiral cutterheads provide a smoother finish, reduce tearout, operate quieter, have longer knife life, and require less horsepower, making them a superior choice for serious woodworkers.
The G0834 features precise parallelogram table adjustment with easy-to-reach handwheels. With the parallelogram table setup, you get more opportunity for fine adjustment of the infeed table and the outfeed table for perfect alignment.
The center-mounted, 47" L x 5-3/8" H fence assists with accurate edge-jointing. It has stops at 45°, 90°, and 135° and comes with rack-and-pinion lateral adjustment.
The H9893 replacement inserts are available when the stock inserts get dull.
The G0834 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information.
Made in an ISO 9001 factory
SPECIFICATIONS: Motor: 5 HP, 230V, single-phase, 19A Maximum width of cut: 12" Maximum depth of cut: 1/8" Maximum rabbeting depth: 1/2" Cutterhead diameter: 3-7/8" Cutterhead type: 8-row spiral with 96 inserts Insert size, type: 15 x 15 x 2.5mm, indexable carbide Cutterhead speed: 4950 RPM Table size: 12-3/4" x 84" Fence size: 47" L x 5-3/8" H Minimum stock length: 14" Minimum stock thickness: 1/2" Dust port size: 5" Footprint: 19-1/2" x 41" Overall dimensions: 84" W x 39" D x 47" H Approximate shipping weight: 1278 lbs. FEATURES: Parallelogram tables with handwheel adjustment Precision-ground cast-iron tables Rabbeting table Pedestal-mounted switch for easy access Magnetic switch with thermal overload protection Solid cabinet stand V-belt drive
