Shop Fox W1773 37" Double Drum Sander
Shop Fox W1773 37" 15 HP 3 phase Drum Sander
Power through large sanding projects in record time.
The W1773 37" 15 HP Drum Sander sands boards and panels up to 4" thick and 36-1/2" wide, using two different abrasive grits in the same pass with the dual 6" sanding drums.
Feed speed is adjustable from 6 to 18 FPM. The variable-speed knob conveyor adjustment and amp meter make it easy to monitor the sanding load to ensure maximum efficiency.
The easy-access control panel with a load meter puts everything you need at your fingertips for efficient operation.
Effortlessly access the sanding drums for maintenance with the gas strut-assisted hinged hood.
The emergency stop bar provides an additional layer of safety for peace of mind while operating the sander.
Changing the 6"-wide by-138" long sandpaper is easy and straightforward. Simply remove the top cover for unobstructed access. A wide selection of replacement sanding rolls, from coarse grits for fast material removal to ultra-fine grits for a flawless, high-grit finish.
The W1772 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The easy-to-read manual provides full instructions on how to assemble and maintain your sander.
Made in an ISO 9001 factory
CSA certified
SPECIFICATIONS: Sanding drum motor: 10 HP, 240V, single-phase, 44A Conveyor motor: 1/3 HP, 2.7A Maximum board width: 36-1/2" Maximum board thickness: 4" Minimum board length: 9" Minimum board thickness: 1/16" Feed rate: Variable, 6–18 FPM Sanding belt size: 6" x 138" Drum surface speed: 2800 FPM Drum diameters: 6" Dust ports: (4) 4" Footprint: 32" W x 45" L Overall dimensions: 62" W x 53" D W x 49" H Approximate shipping weight: 1379 lbs. FEATURES: Two-year warranty!! Industrial rubber conveyor belt Easy-access control panel with load meter Variable-speed conveyor State of the art computer-balanced drums 0.020" Table lift with 360° handwheel turn Advanced dust collection Hinged hood with gas struts for easy drum access
Feed speed is adjustable from 6 to 18 FPM. The variable-speed knob conveyor adjustment and amp meter make it easy to monitor the sanding load to ensure maximum efficiency.
The easy-access control panel with a load meter puts everything you need at your fingertips for efficient operation.
Effortlessly access the sanding drums for maintenance with the gas strut-assisted hinged hood.
The emergency stop bar provides an additional layer of safety for peace of mind while operating the sander.
Changing the 6"-wide by-138" long sandpaper is easy and straightforward. Simply remove the top cover for unobstructed access. A wide selection of replacement sanding rolls, from coarse grits for fast material removal to ultra-fine grits for a flawless, high-grit finish.
The W1772 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The easy-to-read manual provides full instructions on how to assemble and maintain your sander.
Made in an ISO 9001 factory
CSA certified
SPECIFICATIONS: Sanding drum motor: 10 HP, 240V, single-phase, 44A Conveyor motor: 1/3 HP, 2.7A Maximum board width: 36-1/2" Maximum board thickness: 4" Minimum board length: 9" Minimum board thickness: 1/16" Feed rate: Variable, 6–18 FPM Sanding belt size: 6" x 138" Drum surface speed: 2800 FPM Drum diameters: 6" Dust ports: (4) 4" Footprint: 32" W x 45" L Overall dimensions: 62" W x 53" D W x 49" H Approximate shipping weight: 1379 lbs. FEATURES: Two-year warranty!! Industrial rubber conveyor belt Easy-access control panel with load meter Variable-speed conveyor State of the art computer-balanced drums 0.020" Table lift with 360° handwheel turn Advanced dust collection Hinged hood with gas struts for easy drum access
